Deadbolt latch extended and retracted by T-turn on inside. Using key outside will retract deadbolt latch if needed. Resetting the code: - please follow these instructions to reset the code on your Powerbolt 1000 unit: •. Locate the small round program button near the left side of the circuit board (Red or Black). • To program, the latch should be extended out in the lock position, press the reset button once, then enter your 4-8 digit code on the exterior keypad, then immediately press the middle lock button on the exterior keypad.
You will hear a beep. Re-enter the same 4-8 digit code to confirm, the latch should retract. This completes the programming. This signals that your code has been accepted. • To enter a second code, follow the same procedures as in step 3, but this time press the reset button twice then enter your code.
Replacing the batteries: - please follow these instructions to replace the batteries on your Powerbolt 1000 unit: • Remove inner cover plate located above the thumb turn on the inside of the door. Click to view instructions on how to remove cover. • Replace all 4 batteries with quality alkaline AA batteries. (Do not use rechargeable batteries.) • Ensure that the batteries are correctly oriented or unit will not function properly. Changing the password code: - please follow these instructions: • Manually put the bolt in extended (lock) position. Press PROGRAM button once, enter new 4 - 8 digit code and then press LOCK.